- A+
Brother 5580d printer: How to reset ink level after replacing toner
If you’ve recently replaced the toner cartridge in your Brother 5580d printer, you may encounter an issue where the ink level indicator still shows the old levels despite the new cartridge. Don’t worry though, as this is a common issue that can be easily resolved with a reset.
Step-by-step guide to resetting ink level on Brother 5580d printer
Follow these simple steps to reset the ink level on your Brother 5580d printer:
Step 1: Ensure the printer is switched on
Before you get started, make sure the printer is switched on as you cannot reset the ink level when the printer is switched off.
Step 2: Open the front cover
Next, open the front cover of the printer. The cover should pop open easily with the press of a button.
Step 3: Press and hold ‘Go’ for 4 seconds
Once the front cover is open, press and hold the ‘Go’ button on the printer for approximately 4 seconds. This should be enough time to trigger the reset function.
Step 4: Release ‘Go’ button
After holding the ‘Go’ button for 4 seconds, release it and then close the front cover of the printer. You should see the ‘Ready’ light come on, and the printer should be ready to use.
By following these simple steps, you should be able to reset the ink level on your Brother 5580d printer and start printing again. The printer should now recognise the new toner cartridge and show the correct ink level.
Why reset the ink level on your printer?
Resetting the ink level on your printer is essential for two main reasons:
Reason 1: Accurate ink level reading
When you replace the toner cartridge in your printer, the new cartridge may not be recognised immediately, leading to an inaccurate ink level reading. By resetting the ink level, your printer will be able to recognise the new cartridge and show the correct ink level.
Reason 2: Prevent potential print quality issues
Using a printer with low ink levels can lead to potential print quality issues, such as streaks or faded lines. By resetting the ink level and ensuring the ink level is accurate, you can avoid these issues and ensure your printing is of high quality.
Conclusion
Resetting the ink level on your Brother 5580d printer is a simple process that can be done in just a few steps. By resetting the ink level, your printer will recognise the new cartridge and provide an accurate ink level reading. This ensures that you can continue to print with high-quality results without any potential issues.
